Kangaroo Front Flap Setup for Speed Reloads
By LOYAL TO THE MISSION | Published: 2026-10-17
Category: How-to Guides
Learn how to set up a Kangaroo Front Flap for faster magazine changes on your plate carrier. Step-by-step guide with common mistakes to avoid.
Quick Answer
Set up your Kangaroo Front Flap with magazine inserts and MOLLE pouches for fast, reliable reloads. Secure the flap with G Hooks and Velcro, then practice your draw to confirm smooth access.
Why the Kangaroo Front Flap Improves Reload Speed
The Kangaroo Front Flap is designed to work with magazine inserts like the Ferro Concepts MP2 Magazine Pouch Insert, allowing you to carry spare magazines directly on your plate carrier. Its G Hook and Velcro attachment system lets you quickly swap flaps without removing the carrier. This setup keeps your reloads consistent and reduces fumbling under stress.
Step-by-Step Setup for Speed Reloads
- Attach Magazine Inserts: Insert the Ferro Concepts MP2 Magazine Pouch Inserts into the Kangaroo Front Flap's internal pockets. Ensure they sit flat and the retention tabs are accessible. Common mistake: forcing a magazine in without aligning the insert. Check that the insert is fully seated before loading.
- Mount the Flap to Your Carrier: Align the Kangaroo Front Flap's G Hooks with the loops on your plate carrier (Slickster, FCPC, or similar). Press the Velcro firmly to secure it. Checkpoint: the flap should not shift when you tug it. If it moves, re-seat the G Hooks.
- Load Magazines and Practice Draw: Insert your rifle magazines into the MP2 inserts. Practice drawing each magazine with a smooth, straight pull. Adjust retention by bending the insert tabs if needed. Common mistake: over-tightening inserts. You want firm retention but easy one-handed removal.
- Test Reload Under Movement: Wear your carrier and perform dry reloads while moving (walking, turning). This reveals any snag points or misalignment. Checkpoint: if a magazine catches on the flap edge, adjust the insert depth or trim excess material.
Key Components for Your Setup
- Kangaroo Front Flap: The Kangaroo Front Flap uses magazine inserts (KTS/Turnovers) and allows MOLLE compatible pouches on the front. It attaches with G Hooks and Velcro to carriers like The Slickster, Chesty Rig, and FCPC. This gives you the flexibility to carry extra magazines in a secure but rapidly detachable front flap, speeding up reloads.
- Ferro Concepts MP2 Magazine Pouch Insert: The Ferro Concepts MP2 Magazine Pouch Insert is designed for 30-round 5.56, 5.45, 7.62, and .308 rifle magazines in open-top nylon pockets. Using MP2 inserts ensures your magazines stay in place but are easy to draw, reducing the chance of a fumbled reload.
