Back to Blog
Tips & Care 2026-11-18 LOYAL TO THE MISSION 0 views

LTTM Hoodie Care: Keep Your Graphic Hoodie Looking New

LTTM Hoodie Care: Keep Your Graphic Hoodie Looking New

A practical care routine for the LTTM Hoodie: wash a graphic hoodie without cracking the print, dry it to limit pilling, and use the size chart to check fit before you buy.

Start with the print, not the wash cycle

The LTTM Hoodie is a printed unisex hoodie built on a thick, high-quality blank. That print is the part most likely to show wear first, so the goal of any care routine is to protect the printed surface while keeping the fabric soft and pill-free.

The supplied product information does not include a care label or manufacturer washing instructions. What follows is general good practice for printed hoodies, not a set of instructions confirmed for this specific garment. When in doubt, check the label inside your hoodie before washing.

A simple wash routine for a printed hoodie

These steps follow common practice for graphic hoodies. They are not taken from a supplied LTTM care label, so treat them as sensible defaults rather than manufacturer instructions.

  1. Turn the hoodie inside out: This puts the fabric, not the print, against the drum and other garments during the cycle.
  2. Wash cold on a gentle cycle: Cold water and low agitation are gentler on both the print and the cotton blend than hot water and heavy tumbling.
  3. Use a mild detergent: Skip bleach and fabric softener where you can; both are hard on prints and on the hand-feel of thick fleece.
  4. Wash with similar colors: Separating lights and darks keeps a fresh print from picking up dye from other garments.
  5. Skip the dryer if you have space to air dry: Heat is the main enemy of printed graphics, so air drying is the safest default.

Hoodie drying tips that protect the print

  • Air dry flat or on a hanger: Hanging or laying the hoodie flat avoids the heat and tumbling that can crack a print and shrink a thick cotton blend.
  • If you must use a dryer, choose low heat: Low heat and a shorter cycle reduce stress on the print compared with a hot, long cycle.
  • Take it out slightly damp: Finishing on a hanger limits overdrying, which makes fleece feel stiff and can encourage pilling.
  • Avoid direct sun for long periods: Prolonged strong sunlight can fade printed colors over time.

How to stop hoodie pilling on a thick fleece

Pilling is small fiber balls on the surface of the fabric. On thick hoodies it usually comes from friction, so the fix is to reduce rubbing rather than to treat the pills after they appear.

  • Wash inside out: The printed face and the outer fleece surface rub against less when they are turned inward.
  • Avoid overloading the machine: A crowded drum means more friction between garments.
  • Skip rough zippers and Velcro in the same load: These abrade fleece quickly; wash the hoodie with soft items where possible.
  • Remove pills gently if they appear: A fabric shaver or a fine comb used lightly will lift pills without pulling at the print.

What the LTTM Hoodie record confirms

  • LTTM Hoodie: Unisex LTTM Hoodie printed on thick, high-quality hoodies. The thick fleece is what makes pilling and print care worth attention; the print is the feature to protect.
    LTTM Hoodie
    LTTM Hoodie
  • LTTM Hoodie: Size chart: Body Length from Hips, Chest Width 1" Below Armhole, Sleeve Length from Center Back including Cuff Rib. XS 27.5 / 20.5 / 33.5; Small 28.5 / 21 / 34.5; Medium 29.5 / 23 / 35.5; Large 30.5 / 24.5 / 36.5; XL 31.5 / 26.5 / 37.5; 2XL 32.5 / 27.5 / 38.5. Knowing the measurements helps you choose a size that fits the way you plan to wear it, so you are not relying on repeated washing or shrinking to change the fit.

Fit matters before care does

Care keeps a hoodie looking new, but the right size keeps it wearable. The LTTM Hoodie is unisex and comes in Small through XX-Large. The size chart lists body length from the hips, chest width one inch below the armhole, and sleeve length from the center back including the cuff rib, so you can compare those numbers against a hoodie you already like.

If you are between sizes, remember that a thick fleece hoodie has less give than a thin one. Choose based on the measurements rather than assuming the fabric will stretch into place.

Everyday habits that extend hoodie life

  • Wash less often: Spot-clean small marks and air the hoodie between wears; every wash cycle adds a little wear.
  • Store folded rather than on a narrow hanger: A heavy hoodie can stretch at the shoulders when hung for long periods.
  • Keep it away from hot car interiors and radiators: Sustained heat is hard on prints and on fleece loft.

Related Articles

Customer Service
Home
Products
Cart
Profile