Tilbage til blog
Købsguider 2026-11-14 LOYAL TO THE MISSION 28 visninger

FCPC Rear ID Panel: Choosing and Mounting Your ID Patch

FCPC Rear ID Panel: Choosing and Mounting Your ID Patch

The FCPC Rear ID Panel turns the back of your carrier into a patch-ready loop field. Here's what it fits, what it doesn't include, and how to decide if it belongs on your kit.

What the FCPC Rear ID Panel actually does

If you want to run an identification patch on the back of your plate carrier, you need a loop surface to stick it to. The FCPC Rear ID Panel provides that surface: a 3" x 8.625" Velcro loop field designed for attaching identification patches to the rear of the FCPC V5. It is laser cut from 6-layer lightweight thermoplastic and has unique tabs to keep the panel secure.

This is a mounting surface, not a patch. The patch itself is not included, so budget for that separately if you don't already own one. The panel is Berry Compliant and made in the USA, and it comes in Multicam, Coyote Brown, Ranger Green, and Black.

Fit and mounting details that decide compatibility

  • FCPC Rear ID Panel: It can easily be clipped into the rear laser cut MOLLE rows requiring 6 MOLLE column width to work. This is the key compatibility check. Count the MOLLE columns across the rear of your carrier before buying; if you don't have 6 columns of laser cut MOLLE, this panel isn't the right fit.
    FCPC Rear ID Panel
    FCPC Rear ID Panel
  • FCPC Rear ID Panel: Built for the FCPC but can fit any laser cut laminate MOLLE. It's designed around the FCPC V5, but the 6-column laser cut laminate requirement means it can work on other carriers that meet that spec.
  • FCPC Rear ID Panel: Designed with unique tabs to keep panel secure. The tabs are part of how the panel stays put once clipped in, so check that they engage properly when you test-fit it.

ID panel vs. back panel: they solve different problems

These two terms get used interchangeably, but they serve different purposes on a carrier. An ID panel is a flat loop field for a patch. A back panel is typically a larger structure for carrying gear, hydration, or other accessories. The FCPC Rear ID Panel falls firmly in the first category.

  • FCPC Rear ID Panel: A 3" x 8.625" Velcro loop field for identification patches. Adds a patch surface without adding a load-bearing structure. Patch not included.
  • Back panel (general): Usually a larger platform for mounting pouches, hydration, or other gear. If you need to carry equipment on the rear of your carrier, an ID panel won't do that job.

Rear panel patch placement: what to think through

The loop field gives you a defined area, but placement still matters. Keep these practical points in mind before you commit to a patch.

  • Match the patch to the loop field: The loop field is 3" x 8.625". A patch wider or taller than that won't sit fully on the panel. Measure your patch before ordering.
  • Consider what sits behind the panel: The panel clips into the rear laser cut MOLLE rows. Make sure the area behind those rows is clear enough for the tabs to engage and for the panel to sit flat.
  • Think about visibility and purpose: An ID panel is for identification. If your goal is carrying gear, this isn't the right accessory. If your goal is a clean patch surface, it is.

Color choice and what the supplied information doesn't cover

The panel comes in Multicam, Coyote Brown, Ranger Green, and Black, so you can match your carrier or contrast deliberately. Color is the only variant listed, so there's no size choice to make.

A few things aren't confirmed by the supplied information: there's no stated weather resistance rating, no specific carrier compatibility list beyond the 6-column laser cut laminate MOLLE requirement, and no care instructions. If those details matter for your use, check with the manufacturer before relying on the panel in demanding conditions.

Relaterede artikler

Customer Service
Hjem
Produkter
Kurv
Profil