Retour au blog
Guides pratiques 2026-11-20 LOYAL TO THE MISSION 0 vues

Ferro x Hydrapak 1.8L Reservoir: Hydration Setup Guide

Ferro x Hydrapak 1.8L Reservoir: Hydration Setup Guide

Learn how to set up and use the Ferro x Hydrapak 1.8L Reservoir with your plate carrier. Covers tube routing, cleaning, and compatibility.

What This Reservoir Is Built For

The Ferro x Hydrapak Impact 1.8L Reservoir is a custom hydration bladder designed specifically for the Back Panel Water and the upcoming Back Panel Liberty. It uses military-grade construction with abrasion-resistant TPU and RF-welded seams, giving it burst-proof strength in a compact 1.8-liter footprint. If you run a Ferro Concepts plate carrier with an ADAPT Back Panel, this reservoir is the supported hydration solution.

Reservoir Specs at a Glance

  • Ferro x Hydrapak 1.8L Reservoir: 1.8 liters / 60.8 fl oz capacity Provides enough water for extended missions without adding excessive bulk to your back panel.
    Ferro x Hydrapak 1.8L Reservoir
    Ferro x Hydrapak 1.8L Reservoir
  • Ferro x Hydrapak 1.8L Reservoir: 100% BPA & PVC free Safe for drinking water with no plastic leaching concerns.
  • Ferro x Hydrapak 1.8L Reservoir: Reversible design for easy cleaning and drying Lets you turn the bladder inside out to dry thoroughly, preventing mold and odor.
  • Ferro x Hydrapak 1.8L Reservoir: Plug-n-Play™ system for easy hydration tube attachment and removal Makes connecting and disconnecting the drink tube quick without leaks.

Setting Up the Reservoir in Your Back Panel

The reservoir is designed to fit inside the Back Panel Water or Back Panel Liberty. The following steps are based on the supplied product information.

  1. Insert the reservoir into the back panel sleeve: Slide the empty reservoir into the dedicated compartment of your Back Panel Water or Liberty. Ensure the hose port aligns with the panel's exit opening.
  2. Attach the hydration tube using the Plug-n-Play™ system: Connect the hydration tube to the reservoir outlet. The Plug-n-Play™ connector snaps on securely and keeps water cool in high heat.
  3. Route the tube over your shoulder: Thread the tube through any available routing loops or under the shoulder strap webbing so it reaches your mouth without snagging.
  4. Fill and test the system: Fill the reservoir with cold water (max temp as specified in the product instructions). Use the Slide-Seal™ wide opening to close it tight. Test the bite valve by squeezing the Comet™ Valve to confirm flow.

Tube Routing Tips for Plate Carriers

The tube length gives you enough reach to route it over either shoulder. For a clean setup, run the tube under the shoulder pad or through a hydration tube retainer if your carrier has one. The Comet™ Valve includes a twist shut-off, so you can close the tube when not drinking to prevent drips. Avoid pinching the tube between the back panel and the carrier plate—this can restrict flow.

Cleaning and Care

After each use, empty the reservoir and turn it inside out using the reversible design. Hand wash with mild soap and warm water, then hang to dry fully before storing. The Slide-Seal™ wide opening makes it easy to reach every corner. Do not use bleach or abrasive cleaners. The reservoir can be frozen for cold drinks or filled with hot water up to the temperature specified in the product instructions for cleaning.

What the Supplied Information Does Not Cover

The product records confirm compatibility with the Back Panel Water and Back Panel Liberty, but do not include detailed instructions for routing the tube through every carrier model. For custom setups, you may need to secure the tube with aftermarket retainers or cable ties. The No-Leak™ Guarantee covers the reservoir itself, but always check for punctures or wear after heavy use.

Articles connexes

Customer Service
Accueil
Produits
Panier
Profil