Tilbake til bloggen
Veiledninger 2026-11-18 LOYAL TO THE MISSION 0 visninger

Bora Breakaway Loop Setup: Emergency Release on Your Rig

Bora Breakaway Loop Setup: Emergency Release on Your Rig

Mount the Bora Breakaway Loop on a 2" MOLLE belt and confirm the breakaway path works with your helo lanyard before you rely on it.

The loop is an attachment point, not a pouch

The Bora Breakaway Loop gives your helo lanyard a dedicated home on a 2" MOLLE belt. It is built around a heavy-action releasable snap: under normal use the lanyard stays put, and under a dangerous load, such as a snag during a fast exit or movement, the loop breaks away to reduce the potential snag hazard.

That makes setup less about threading a pouch and more about giving the breakaway a clean path. Before you mount anything, decide where the lanyard will run and what has to move when the snap releases.

What the Bora Breakaway Loop gives you to mount

  • Bora Breakaway Loop: Mounts to any 2" MOLLE belt with 1/2" webbing. This is the belt interface the loop is designed for, so check your belt's webbing before you plan the rest of the setup.
    Bora Breakaway Loop
    Bora Breakaway Loop
  • Bora Breakaway Loop: Uses a durable heavy-action releasable snap. The snap is the release mechanism. How you route the lanyard around it determines whether the breakaway can actually work.
  • Bora Breakaway Loop: The loop retains structure for easy DON/DOFF. A loop that keeps its shape is easier to find and use when you are putting the rig on or taking it off.

A supported mounting sequence

  1. Confirm the belt interface: The loop is made for a 2" MOLLE belt with 1/2" webbing. If your belt does not match that interface, the supplied information does not confirm a fit, so stop and verify before mounting.
  2. Choose a position with a clear breakaway path: Pick a spot where the lanyard can run without catching on other gear. The loop breaks away under dangerous loads, so anything that blocks that release path works against the design.
  3. Mount the loop to the belt: Attach the loop at the chosen point on the 2" MOLLE belt. The supplied record does not include a step-by-step threading diagram, so follow the belt and loop interfaces rather than forcing a route that does not match the webbing.
  4. Route the helo lanyard through the loop: The loop is designed to retain the helo lanyard. Set the lanyard so it sits in the loop under normal use and can pull free when the snap releases.
  5. Test the release path before you load the belt: With the lanyard in place, check that the loop can break away without snagging on nearby pouches, straps, or belt hardware. The supplied record describes the breakaway behavior but does not provide a test procedure, so treat this as a visual and functional check rather than a manufacturer test protocol.
  6. Add pouches over the installed loop if needed: The loop provides usable MOLLE space after installation, so a Roll 1TM Trauma Pouch or other pouch can be mounted over it. Recheck the breakaway path after adding anything.

Placement choices and what each one changes

Where you put the loop changes what the lanyard can do. A forward position keeps the lanyard close to your hand and may suit a fast exit where you want the lanyard to release away from your body. A rearward position can keep the lanyard out of the way during movement, but it may put the breakaway path near more gear.

The supplied record does not specify a recommended belt position, so use the clear-path rule: the loop should be reachable, the lanyard should be retained under normal use, and the breakaway should not be blocked by pouches or hardware. If you mount a pouch over the loop, confirm the pouch does not sit in the release path.

Loop alone vs loop with a pouch mounted over it

Both arrangements are supported by the supplied record, but they solve different problems.

  • Loop alone: Keeps the breakaway path exposed and easy to inspect. Best when the lanyard is the priority and you do not need extra pouch space at that point.
  • Loop with a Roll 1TM Trauma Pouch or other pouch over it: Uses the MOLLE space the loop provides after installation. This adds gear near the breakaway, so check that the pouch does not interfere with the snap releasing.

What the supplied information does not cover

The record confirms the belt interface, the releasable snap, the breakaway behavior under dangerous loads, and the usable MOLLE space after installation. It does not include a torque value, a load rating, a specific lanyard length, or a step-by-step release test. Do not treat this guide as a substitute for those missing details.

If your setup depends on a number the record does not provide, verify it with the manufacturer or your unit's guidance before relying on the loop in a fast-exit or snag scenario.

Relaterte artikler

Customer Service
Hjem
Produkter
Handlekurv
Profil