Powrót do bloga
Poradniki 2026-11-21 LOYAL TO THE MISSION 0 wyświetleń

Comms Pad Behind the Head: Helmet Communication Setup

Comms Pad Behind the Head: Helmet Communication Setup

Learn how the Comms Pad Behind the Head improves comfort and breathability under helmets for tactical headsets like MSA Sordin and TCI Liberator.

What the Comms Pad Behind the Head Does

When you wear a helmet over a behind-the-head headset, the extra bulk can create pressure points and reduce airflow. The Comms Pad - Behind The Head is a lightweight laser-cut strap designed to bridge that gap. It adds a thin layer of cushioning between the headband and your helmet liner, which improves comfort and breathability during extended use.

The pad is made in the USA and is Berry Compliant. It fits most behind-the-head headsets, including popular models like MSA Sordin and TCI Liberator. However, it does not fit Peltor Comtac Behind the Head headsets, so check your headset model before ordering.

Key Product Details

  • Comms Pad - Behind The Head: This lightweight laser cut headset strap increases comfort under helmets and breathability. The laser-cut design reduces bulk and improves airflow, which is critical when wearing a helmet for long periods.
    Comms Pad - Behind The Head
    Comms Pad - Behind The Head
  • Comms Pad - Behind The Head: These fit most behind the head headsets such as MSA Sordin, TCI Liberator, and many more. Compatibility is the first thing to confirm before buying. This pad works with the most common tactical behind-the-head headsets, but not with Peltor Comtac Behind the Head models.
  • Comms Pad - Behind The Head: Made in the USA Berry Compliant Berry Compliance matters for military and some law enforcement users who need domestically sourced gear.

Choosing the Right Color

The Comms Pad - Behind The Head is available in five color options: Multicam, Multicam Black, Coyote Brown, Ranger Green, and Black. This allows you to match the pad to your helmet cover, headset, or overall kit color scheme. The pad itself is a simple strap, so color coordination is purely aesthetic—all variants offer the same fit and function.

Installation Steps

Installing the Comms Pad Behind the Head is straightforward and requires no tools. Follow these steps to get it set up correctly.

  1. 1. Remove your headset from the helmet: Take off your helmet and unclip or slide the behind-the-head headset off the helmet rails or straps. Set the helmet aside.
  2. 2. Align the pad with the headband: Place the Comms Pad along the top of the behind-the-head headband. The laser-cut strap should sit centered on the band, with the cutouts facing outward for breathability.
  3. 3. Secure the pad: The pad uses a simple wrap-around design. Loop the ends around the headband and fasten them using the built-in attachment method (typically hook-and-loop or an elastic loop). Ensure the pad is snug but not overly tight.
  4. 4. Reinstall the headset on the helmet: Clip or slide the headset back onto your helmet rails or straps. Adjust the headset position as needed so the pad sits comfortably between the headband and the helmet liner.
  5. 5. Test the fit: Put the helmet on and check for pressure points. The pad should reduce the headband's contact with the helmet, improving airflow. If the pad shifts during movement, reposition and secure it more tightly.

What the Supplied Information Does Not Cover

The product record does not include specific care or cleaning instructions for the Comms Pad. For routine maintenance, hand-wash the pad with mild soap and water, then air dry. Avoid machine washing or drying, which could damage the laser-cut material. The pad is also not rated for any specific weather or protection level—it is purely a comfort accessory.

Powiązane artykuły

Customer Service
Strona główna
Produkty
Koszyk
Profil