Back to Blog
How-to Guides 2026-11-17 LOYAL TO THE MISSION 0 views

5" Assault Cummerbund Fit and Adjustment Guide

5" Assault Cummerbund Fit and Adjustment Guide

Learn how to size and adjust the 5" Assault Cummerbund for a stable, comfortable plate carrier fit. We cover sizing, ride height, and comms routing.

Start with your vest's loop fields

The 5" Assault Cummerbund attaches to any vest that has hook-and-loop fastener fields on the front and rear plate bags. Before you focus on the cummerbund itself, confirm that your carrier provides those loop surfaces. Without them, the cummerbund has nothing to anchor to.

The cummerbund is sold as a set and is available in three sizes (Medium, Large, X-Large) and four colorways (Multicam, Multicam Black, Coyote Brown, Ranger Green). The semi-rigid design is intended to support side armor without the sag common in other designs, and the 5-inch height is meant to maintain stability under increased loads.

What the 5" Assault Cummerbund provides

  • 5" Assault Cummerbund: Semi-rigid cummerbund that enhances stability and weight distribution. A rigid structure helps keep side armor and pouches from sagging, which is the core reason to choose this cummerbund over a softer design.
    5" Assault Cummerbund
    5" Assault Cummerbund
  • 5" Assault Cummerbund: Hidden stretch section adjusts automatically to body movement for added comfort. The stretch section is what allows the cummerbund to move with you while the rigid panels maintain structure.
  • 5" Assault Cummerbund: Compatible with 3AC Side Soft Armor and 3AC Side Plate Pockets 6x6. If you plan to run side plates or soft armor, this confirms the cummerbund is designed to work with those accessories.

Choose a size with your full loadout in mind

The 5AC comes in Medium, Large, and X-Large. The manufacturer recommends considering whether you will be wearing side plates, radios, or both, because those items add girth to the inside of the cummerbund. In other words, size for the gear you will actually carry, not just your bare torso.

The supplied record includes a sizing guide, but the specific measurements for each size are not listed here. Use the guide as your primary reference, and factor in any accessories that will sit inside the cummerbund.

Size options and weight

  • 5" Assault Cummerbund: Available sizes: Medium, Large, X-Large. Three sizes cover a range of body types, but the right choice depends on your loadout as much as your waist measurement.
  • 5" Assault Cummerbund: Weight: Medium 9.4 oz, Large 10.7 oz, X-Large 12.2 oz. Weight increases with size, which is worth noting if you are counting ounces on a lightweight setup.

Set ride height and comms routing

The cummerbund can be flipped to use the integrated interior One Wrap for comms routing on either the top or bottom. That means you can choose which edge carries cables, depending on whether you prefer routing above or below your side pouches. The interior One Wrap is designed for cable management, keeping radio and comms wires tidy.

Because the cummerbund attaches with hook-and-loop, you can adjust its vertical position on the vest's loop fields to set ride height. The D handles on the front are intended for easy donning and doffing. The Velcro inside allows for quick addition or removal of armor pockets.

Setup features that affect fit

  • 5" Assault Cummerbund: Integrated interior One Wrap for comms routing and cable management. Routing cables inside the cummerbund keeps them protected and reduces snag hazards.
  • 5" Assault Cummerbund: Cummerbund can be flipped to use comms routing on either the top or bottom. This flexibility lets you adapt the cummerbund to your preferred cable path without extra hardware.
  • 5" Assault Cummerbund: D handles on front for easy don/doff. Quick release matters when you need to get in and out of the carrier efficiently.

A supported adjustment sequence

  1. Confirm loop fields on your vest: Check that your front and rear plate bags have hook-and-loop fastener fields. The cummerbund attaches to these surfaces.
  2. Attach the cummerbund at your desired ride height: Press the cummerbund onto the loop fields at the vertical position you want. You can reposition it before fully pressing down.
  3. Choose your comms routing orientation: Flip the cummerbund so the interior One Wrap faces either up or down, depending on where you want cables to run.
  4. Add side armor or pockets if needed: The cummerbund is compatible with 3AC Side Soft Armor and 3AC Side Plate Pockets 6x6. The interior Velcro allows quick addition or removal.
  5. Check stability and comfort: With your typical load, ensure the cummerbund feels secure and does not sag. The hidden stretch section should allow movement without loosening the attachment.

What the supplied information does not cover

The record does not provide specific adjustment procedures beyond the attachment method, nor does it list torque values or maintenance instructions. For detailed care, follow the manufacturer's guidance. Also note that the cummerbund does not reflect under IR light/NOD, which may matter for certain nighttime operations.

Related Articles

Customer Service
Home
Products
Cart
Profile