Start with the mask, then pick the mount
The Guss is a flexible storage sleeve with a 5-liter (305 in³) capacity, built to hold a gas mask with filter and voice modulator or other bulky gear. Before you load it, decide how you want to carry it: the sleeve supports three distinct attachment methods, and that choice affects how you route the shock cord and where the dust covers sit.
The supplied record confirms fit for AVON FM 54 style gas masks with filter and voice modulator. If you run a different mask, check its overall envelope against the 5-liter capacity before committing. The sleeve is fully ambidextrous, so you can set it up for left- or right-side access without reversing the body.
What the Guss gives you to work with
- The Guss™ - Gas Mask / Utility Storage Sleeve: Capacity: 5 liters (305 in³) This is the working volume for your mask, filter, and any accessories. It fits AVON FM 54 style masks with filter and voice modulator, but larger masks or extra layers may fill it quickly.

The Guss™ - Gas Mask / Utility Storage Sleeve - The Guss™ - Gas Mask / Utility Storage Sleeve: Fully ambidextrous design with shock cord cinching at both openings You can orient the sleeve for left- or right-hand access and tension the cord at either end to keep contents secured.
- The Guss™ - Gas Mask / Utility Storage Sleeve: Dual expandable dust covers and a small interior loop Velcro section with a pocket for the covers The covers protect the openings when the sleeve is not in active use, and the interior pocket keeps them stowed when you want quick access.
Mounting The Guss: three supported paths
The Guss comes with hardware for each method. Choose one based on your carrier, belt, or strap setup.
- 1. 6x3 MOLLE at the rear: The back of the sleeve has a 6x3 MOLLE field. Weave it onto a compatible platform if you want a fixed, high-retention mount. This is the most permanent of the three options.
- 2. Included adjustable waist strap: The sleeve ships with a waist strap that attaches and detaches via a split bar buckle on each side. Use this when you want to carry the sleeve on your waist without MOLLE, or when you need to move it between setups quickly.
- 3. The Hangboard attachment: The included Hangboard converts The Guss into a Dangler-style carry. This gives you a third option for hanging the sleeve from gear without weaving MOLLE or using the waist strap.
Load and cinch: a simple sequence
Once you have chosen a mount, load the sleeve before you tension the shock cord. Place the mask with filter and voice modulator inside, then add any smaller items. The dual openings let you access contents from either end, so decide which end will face you before you cinch down.
The shock cord at each opening cinches to secure the load. The interior loop Velcro section can hold a small patch or accessory, and the pocket keeps the expandable dust covers out of the way when not in use. If you are using the dust covers, deploy them over the openings after the sleeve is loaded and mounted.
Which mount fits your setup?
Each method trades off between permanence, speed of access, and how much real estate it occupies.
- MOLLE (6x3 rear field): Best if you already have a MOLLE-compatible carrier or belt and want the sleeve locked in place. It uses the most attachment space and is the slowest to move between platforms.
- Waist strap (included): Best for standalone carry or quick swaps. The split bar buckles let you detach the strap without unweaving anything. It adds a strap around your waist, which may conflict with other belt gear.
- Hangboard (included): Best when you want dangler-style carry from a belt or harness without MOLLE. It keeps the sleeve hanging rather than pressed against a platform, which can affect how quickly you access the openings.
Color, finish, and what the record leaves open
The Guss is available in Multicam, Multicam Black, Coyote Brown, Ranger Green, and Black. The supplied record notes that the color of the thermoplastic may vary from images while the design remains the same, and you may receive the updated version. That is a cosmetic variable, not a functional one.
The supplied information does not include weatherproofing ratings, vehicle compatibility, or safety-critical setup instructions for gas mask use. Treat The Guss as a storage and carry sleeve, and follow your mask manufacturer’s guidance for protective use. If you need a confirmed fit for a non-AVON mask, measure its envelope against the 5-liter capacity before you buy.

