Back to Blog
How-to Guides 2026-10-22 LOYAL TO THE MISSION 16 views

Wingman V2 Setup Guide for Plate Carriers

Wingman V2 Setup Guide for Plate Carriers

Learn how to attach and configure the Wingman V2 pouch on your plate carrier using the ADAPT System. Step-by-step instructions for a secure, balanced loadout.

Quick Answer

Mount the Wingman V2 pouches under your cummerbund using the integrated Velcro hook-and-loop, then adjust the elastic tension to secure your gear without over-compressing it.

Why Placement Matters for Balance

The Wingman V2 is designed to sit under the cummerbund of most plate carriers, not on the front panel. This keeps your chest area clear for magazine pouches or a chest rig while adding storage on your sides. Placing it too far forward can restrict arm movement or interfere with shoulder straps.

Because the pouch uses 4-inch MIL-SPEC elastic, it stretches to hold bulky items like a large personal radio or two AR magazines. The elastic also compresses when empty, so the pouch stays low-profile and doesn't snag on gear.

Common Mistake: Overloading One Side

The Wingman V2 is sold as a set of two (left and right). If you only attach one pouch, the carrier will list to that side under load, especially with heavy items like a radio. Always mount both pouches and distribute weight evenly, even if one side carries lighter gear.

For medical supplies, consider using one pouch for a TQ and shears and the other for a radio or spare mags. This keeps your loadout balanced and accessible from either hand.

Wingman V2 Setup Steps

  1. 1. Identify Left and Right Pouches: Each Wingman V2 is marked for left or right side. The Velcro attachment panel faces inward toward the cummerbund. Hold the pouch so the opening faces forward when attached. Mixing left and right pouches will make the opening face backward. Double-check the orientation before attaching.
  2. 2. Attach to Cummerbund: Slide the hook-and-loop panel of the pouch under the cummerbund webbing, aligning it with the Velcro field. Press firmly to secure. The pouch should sit at your ribcage level, not under your armpit. If the pouch is too high, it will rub your arm when you move. Adjust the cummerbund height first.
  3. 3. Load Gear and Adjust Tension: Insert your radio, magazines, or medical pouch into the elastic sleeve. The elastic should hold the item snugly without distorting its shape. If the item wobbles, the elastic may be stretched out—consider using the internal S&S Precision tabs for extra retention. Overstuffing the pouch will reduce retention and may cause gear to fall out during movement.
  4. 4. Test Range of Motion: After loading both pouches, put on the carrier and perform arm raises, twists, and bends. The pouches should stay in place and not shift. If they slide, the Velcro may need a firmer press or the cummerbund may need tightening. A loose pouch can shift your center of gravity. Reattach with more pressure or add a strap if your cummerbund allows.

Product Details

  • Wingman™ V2: Constructed from 4-inch MIL-SPEC elastic to keep items secure. The elastic holds gear firmly during movement but compresses when empty, keeping the pouch low-profile.
    Wingman™ V2
    Wingman™ V2

Related Articles

Customer Service
Home
Products
Cart
Profile