Wingthing™ Setup: How to Attach and Adjust

Quick answer

Attach the Wingthing™ to your plate carrier or MOLLE panel by weaving it through the webbing, then adjust the position so your knife or pouch sits where you need it.

Step-by-step: Attach and adjust the Wingthing™

1. Choose your mounting location: Decide where on your plate carrier or MOLLE panel you want the Wingthing™. Common spots include the cummerbund, shoulder straps, or front panel for easy access. Test the reach and clearance before weaving the straps.
2. Weave the Wingthing™ through the webbing: Starting from the top, thread the Wingthing™ straps through the MOLLE webbing slots. Push the straps all the way through until the platform sits flush against the carrier. Make sure the straps are not twisted; a twisted strap reduces stability.
3. Secure the straps: Fold the straps back and tuck them under the webbing or use the built-in retention loops. Pull tight so the Wingthing™ does not shift under load. If the platform feels loose, re-weave with more tension or use a zip tie for extra security.
4. Attach your knife or pouch: Slide the kydex holster or MOLLE pouch onto the Wingthing™ slots. Ensure the locking mechanism clicks or the straps are fully threaded. Check that the item does not wobble; if it does, adjust the Wingthing™ position or add a retention band.
5. Adjust for comfort and access: Shift the entire assembly slightly left, right, up, or down on the webbing until the draw is natural and the item does not interfere with gear or movement. Do a full range-of-motion test (bending, twisting) to confirm the setup stays put.

Product facts

• Wingthing™: The Wingthing™ is a universal mounting platform version of the popular Wingman™ pouch, originally designed for knife mounting on carriers. Its rigid design supports heavier items like radios, and the slot spacing fits most kydex holsters, making it versatile beyond knife carry.